RECARO Monza User Manual

Installation instructions Monza 5-point-harness
The first step is to attach the crotch strap:
To do so, fold the backrest backwards (if installed, remove the back stabilisers).
Afterwards, the belt side without buckle (marked with arrows in the second
picture) is inserted between the backrest and seat (see third picture). Then
place this end of the belt centrally under the seat.
(1. fully fitted belt in the car seat)
(2. crotch strap)
(3. Gap between backrest and seat.)
Backrest
Seat

RECARO Monza Specifications

General

Weight Group	Group 2/3
Weight Range	15 - 36 kg
Age Range	3-12 years
Installation	Vehicle seat belt
Adjustable Headrest	Yes
Side Impact Protection	Yes
Upholstery	Breathable fabric

Summary

Crotch Strap Attachment

Prepare Seat for Crotch Strap

Fold backrest, remove stabilisers, and insert belt without buckle between seat and backrest.

Position Crotch Strap Under Seat

Place the end of the crotch strap centrally under the car seat.

Harness Buckle and Strap Routing

Thread Buckled Strap Through Cushion

Thread the strap with buckle through fabric pad and foam, pulling short end upwards.

Attach Metal Buckle Component

Attach the metal buckle to the long end of the strap using the provided mechanism.

Connecting Harness Components

Join Main Harness Buckles

Connect the two main harness buckles together centrally under the seat.

Attach Belt Buckle to Strap

Secure the main belt buckle to the harness strap.

Adjuster Mechanism Setup

Route Strap Through Abduction Block

Guide the short strap through the abduction block and plastic adjuster.

Thread Strap Through Top Slit

Pass the belt from front to back through the top slit of the adjuster.

Final Strap Adjustments

Secure Strap in Plastic Adjuster

Pull the strap end through the black plastic adjuster as indicated by arrows.

Prepare Shoulder Strap Attachment

Gather shoulder straps and hardware for attachment to the seat.

Anchoring Shoulder Straps

Attach Shoulder Straps to Headrest

Connect strap ends with eyelets to headrest screws, then thread straps forward onto the seat.

Secure Side Belt Anchor

Guide the other belt end to the side between seat and backrest and screw it on.