To Next PageTo Next Page
Need help?Do you have a question about the Record Power WG250 and is the answer not in the manual?
General| Motor Power | 250 W |
|---|---|
| Wheel Diameter | 250mm |
| Wheel Width | 50mm |
| Bore Diameter | 12.7 mm |
| Voltage | 230V |
| Bore Size | 1/2 inch |
Symbols indicating required actions for safe operation.
Symbols indicating potential hazards and risks during operation.
Guidelines for safe use, personal protective equipment, and appropriate attire.
Importance of knowing the machine and ensuring it is stable.
Safe techniques for moving and positioning the machine.
Essential checks before starting the machine.
Maintaining a clean, lit, and hazard-free workspace.
Proper electrical connection and supply requirements.
Measures to avoid unintentional machine startup.
Safe methods for holding and securing workpieces.
Importance of alertness and using correct tools.
Use of dust extraction and ensuring machine guards are in place.
Safety during maintenance, repairs, and handling damaged parts.
Risks of using unapproved accessories.
Warning that the motor may become hot during use.
Specific safety for wet sharpeners, including stability and risks.
Water level, stone condition, and angle settings.
Stone care, rust prevention, and adherence to regulations.
Details of the 5-year guarantee, including exclusions.
Steps to follow for making a guarantee claim.
Exclusions from liability, particularly for commercial use.
Information on guarantee applicability and consumer rights.
List of all items included in the machine's package.
Instructions for removing transit protection components.
Step-by-step guide to installing the sharpening stone.
Procedures to ensure the stone runs true and within tolerances.
How to true and dress the stone for optimal performance.
Instructions for correctly installing the leather honing wheel.
Installing and seating optional honing wheels.
Steps for mounting and filling the water tank.
How to install the support arm in various positions.
How to start, stop, adjust speed, and general operating advice.
Procedure for dealing with machine stalls or blockages.
Steps to follow in the event of a power interruption.
Guide on using the tool to maintain stone surface concentricity and parallelism.
How to use the stone grader for different grinding applications.
Best practices for grinding tools, including jig usage.
Guidance on honing tools on the leather wheel with compound.
Setting up jigs using angle finders and gauges.
How to adjust the torque on the friction drive for heavy machining.
Step-by-step instructions for sharpening knives with this jig.
Identifies the adjustable clamp, stop, and adjustment knobs.
Step-by-step instructions for sharpening longer knives.
Identifies the clamp, stop, and adjustment knobs.
Step-by-step instructions for sharpening gouges and V-tools.
Identifies knob screw, tool holder, and shaft.
Step-by-step instructions for sharpening small carving tools and gouges.
Identifies knob screw and tool holder.
Step-by-step instructions for sharpening scissors and shears.
Identifies knob screw, scissor holder, and clamp.
Step-by-step instructions for sharpening plane blades.
Identifies lock nut, fence, lock knob, and rocker pads.
Step-by-step instructions for sharpening axes.
Identifies the axe jig itself.
Step-by-step instructions for sharpening plane irons and chisels.
Identifies clamp and lock knob.
Step-by-step instructions for sharpening various tools using the rest.
Identifies the lock knob.
Step-by-step instructions for grinding against the side of the sharpening stone.
Identifies lock knob and support arm.
Instructions for mounting and using the support arm extension.
Identifies lock knob and extension arm.
Procedures for cleaning and storing the machine.
Guidance on inspecting and replacing motor brushes.
Procedure for replacing a worn sharpening stone.
Procedure for replacing the worn honing wheel.
Common motor problems and solutions for vibration.
Addressing issues with sharpening surface flatness and quality.
Diagnosing and fixing brush sparking and other operational faults.
Information on plugs, cable colours, fuses, and wiring.
Visual guides for electrical connections based on voltage.
