Contrary to what the name suggests, this attribute does not specify the number of times a database link
retries to bind with the remote server but the number of times it tries to bind with the remote server. A
value of 1 here indicates that the database link only attempts to bind once.
NOTE
Retries only occur for connection failures and not for other types of errors, such as invalid bind
DNs or bad passwords.
Parameter Description
Entry DN cn=default instance config, cn=chaining
database, cn=plugins, cn=config
Valid Range 0 to 5
Default Value 3
Syntax Integer
Example nsBindRetryLimit: 3
3.5 .2.4 . nsBindT imeout
This attribute shows the amount of time before the bind attempt times out. T here is no real valid range
for this attribute, except reasonable patience limits.
Parameter Description
Entry DN cn=default instance config, cn=chaining
database, cn=plugins, cn=config
Valid Range 0 to 60 seconds
Default Value 15
Syntax Integer
Example nsBindT imeout: 15
3.5 .2.5. nsChe ckLocalACI
Reserved for advanced use only. T his attribute controls whether ACIs are evaluated on the database
link as well as the remote data server. Changes to this attribute only take effect once the server has
been restarted.
Parameter Description
Entry DN cn=default instance config, cn=chaining
database, cn=plugins, cn=config
Valid Values on | off
Default Value off
Syntax DirectoryString
Example nsCheckLocalACI: on
3.5 .2.6. nsConcurre ntBindLimit
This attribute shows the maximum number of concurrent bind operations per T CP connection.
Parameter Description
Entry DN cn=default instance config, cn=chaining
database, cn=plugins, cn=config
Valid Range 1 to 25 binds
Default Value 10
Syntax Integer
Example nsConcurrentBindLimit: 10
3.5 .2.7. nsConcurre ntOperationsLimit
This attribute specifies the maximum number of concurrent operations allowed.
Parameter Description
Entry DN cn=default instance config, cn=chaining
database, cn=plugins, cn=config
Valid Range 1 to 50 operations
Default Value 2
Syntax Integer
To Next Page
Loading...