Red Hat 8.1 - Restart-Slapd (Restarts the Directory Server); Restoreconfig (Restores Administration Server Configuration); Saveconfig (Saves Administration Server Configuration)

log in, use this script to compare the user's password to the password stored in the directory.
Syntax
pwdhash [ -D config_directory ] [ -H ] [[ -s scheme ] | [ -c comparepwd ]] [ password ]
Options
Table 7.12. pwdhash Options
Option Description
-D config_directory Gives the full path to the configuration directory.
-c password Gives the hashed password string to which to
compare the user's password.
-s scheme Gives the scheme to hash the given password.
-H Shows the help.
For more information on the different storage schemes, such as SSHA, SHA, CRYPT , and CLEAR, see the
Directory Server Administrator's Guide.
7.3.13. restart -sla pd (Restart s the Directory Server)
Restarts the Directory Server.
Syntax
restart-slapd
Options
There are no options for this script.
Exit Status
Table 7.13. restart-sla pd Exit Status Codes
Exit Code Description
0 Server restarted successfully.
1 Server could not be started.
2 Server restarted successfully but was already
stopped.
3 Server could not be stopped.
7.3.14 . re st oreconfig (Rest ores Administration Se rve r Configura tion)
Restores, by default, the most recently saved Administration Server configuration information to the
NetscapeRoot partition under the /etc/dirsrv/slapd-instance_name/ directory.
To restore the Administration Server configuration, do the following:
1. Stop the Directory Server.
2. Run the restoreconfig script.
3. Restart the Directory Server.
4. Restart the Administration Server for the changes to be taken into account.
Syntax
restoreconfig
Options
There are no options for this script.
7.3.15. sa ve config (Saves Administration Server Configuration)
Saves Administration Server configuration information to
/var/lib/dirsrv/slapd-instance_name/bak directory.
This script will only run if the server is running.
Red Hat Directory Server 8.1 Configuration and Command Reference 217