Table 2.2. dse.ldif File Attributes
Attribute Value Logging enabled or disa bled
nsslapd-accesslog-logging-
enabled
nsslapd-accesslog
on
empty string
Disabled
nsslapd-accesslog-logging-
enabled
nsslapd-accesslog
on
filename
Enabled
nsslapd-accesslog-logging-
enabled
nsslapd-accesslog
off
empty string
Disabled
nsslapd-accesslog-logging-
enabled
nsslapd-accesslog
off
filename
Disabled
Parameter Description
Entry DN cn=config
Valid Values Any valid filename.
Default Value /var/log/dirsrv/slapd-instance_name/access
Syntax DirectoryString
Example nsslapd-accesslog:
/var/log/dirsrv/slapd-instance_name/access
2.3.1.2. nsslapd- accesslog-level (Access Log Level)
This attribute controls what is logged to the access log.
Parameter Description
Entry DN cn=config
Valid Values
0 - No access logging
4 - Logging for internal access operations
256 - Logging for connections, operations,
and results
512 - Logging for access to an entry and
referrals
131072 - Provides microsecond operation
timing
These values can be added together to
provide the exact type of logging required; for
example, 516 (4 + 512) to obtain internal
access operation, entry access, and referral
logging.
Default Value 256
Syntax Integer
Example nsslapd-accesslog-level: 256
2.3.1.3. nsslapd-acce sslog-list (List of Access Log Files)
This read-only attribute, which cannot be set, provides a list of access log files used in access log
rotation.
Parameter Description
Entry DN cn=config
Valid Values
Default Value None
Syntax DirectoryString
Example nsslapd-accesslog-list: accesslog2,accesslog3
2.3.1.4 . nsslapd-accesslog-logbuffering (Log Buffering)
When set to off, the server writes all access log entries directly to disk. Buffering allows the server to
use access logging even when under a heavy load without impacting performance. However, when
debugging, it is sometimes useful to disable buffering in order to see the operations and their results
To Next Page