Red Kite Push Me Savanna i

Need help?

Do you have a question about the Red Kite Push Me Savanna i and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features

The Red Kite Push Me Savanna i is a versatile travel system designed to adapt to a child's growth from newborn to toddler. It functions as a carry cot, a stroller, and a car seat carrier, offering multiple modes of transport.

Function Description:

Carry Cot Mode: This mode is suitable for newborns and infants who cannot sit up unaided, roll over, or push themselves up on their hands and knees. It provides a flat, horizontal sleeping or resting position, which is recommended for newborns. The maximum weight capacity for this mode is 9kg. The harness is typically removed in this mode for newborn use.
Stroller Mode: Intended for children from 6 months up to 22kg or 4 years, whichever comes first. In this mode, the seat unit is raised, and the harness is connected. The stroller offers adjustable seating positions, including a fully reclined position advisable for newborns if used in stroller mode. It features both fixed and swivel front wheels for maneuverability.
Car Seat Mode: This mode allows for the attachment of a compatible car seat (R129 Universal, for infants up to 13kg, category 40-85cm) to the pushchair frame using adaptors. This provides a convenient way to transfer a sleeping infant from the car to the pushchair without disturbance.

Important Technical Specifications:

Stroller Standard: EN1888-2:2018
Carry Cot Mode Capacity: Suitable for children up to 9kg, who cannot sit up unaided, roll over, or push themselves up.
Stroller Mode Capacity: Intended for children from 6 months up to 22kg or 4 years, whichever comes first.
Rear Facing Infant Carrier Standard: R129 Universal
Infant Carrier Capacity: For infants up to 13kg, Category: 40 – 85 cm.
Maximum Load (Shopping Basket): Do not exceed 2kg.

Usage Features:

Opening the Frame: To open, release the locking catch and lift the handle upwards until it locks into place. Always ensure all locking devices are engaged before use.
Wheel Assembly: Front wheels are inserted into holders and pushed upwards until they click. Rear wheels are pushed into the axle unit until they lock.
Wheel Functionality: Front wheels can be set to fixed or swivel mode by sliding a lock. To remove wheels, push a button and pull down (front) or pull down a clip (rear).
Brake Operation: To engage, push down on the rear of the brake pedal. To release, push forward on the front of the pedal. Always apply all brakes when parking the stroller.
Seat Unit Attachment/Removal: Before attaching, ensure the metal bar is under the Velcro flap. Insert adaptors into brackets and press down until flat and locked. To remove, pull up catches on both sides of adaptors and lift.
Bumper Bar Attachment/Removal: Insert ends into holes on top of seat adaptors and press down until it clicks. To remove, press the button and lift up.
Apron Attachment: Attach the apron to the seat with the zip, fold the end flap around the bumper bar, and secure with elastic toggles.
Seat Unit Adjustment:
- Angle Adjustment: Press the button on the back of the seat (behind the hood) to adjust the angle of the frame.
- Backrest Adjustment: To lower, squeeze the butterfly clasp on the back of the seat and pull down. To raise, hold the end of the strap, squeeze the clasp, and push forward.
Hood Operation: Simply push or pull the front of the hood backwards or forwards to adjust.
Car Seat Adaptor Insertion: Insert adaptors into the car seat until they lock. Then insert both car seat adaptors into the pushchair frame until it locks.
Car Seat/Adaptor Removal: To remove the car seat and adaptors from the pushchair, lift up the catches on both sides of the adaptors and lift upwards. To remove adaptors from the car seat, press the grey buttons on the car seat and pull the adaptors downwards.
Folding the Stroller:
1. Ensure front wheels are in swivel mode.
2. Adjust seat angle so the frame is parallel with the main handle.
3. Pull stroller backwards slightly so front wheels face backwards.
4. Slide button to the side and squeeze the trigger to drop the handle towards the floor; the locking catch will engage automatically.
5. Press the button at the bottom of the seat unit and swivel the lower half towards the head.
6. For optimum storage, release the Velcro on the back of the seat unit (with the bar underneath) to fold the seat more compactly.
Harness Adjustment and Security: Slide the shoulder strap (A) onto the waist strap (B), then push the forked clip into the central buckle housing (C). Adjust tightness using sliders. To release, push the button in the centre of the buckle housing. Always use the crotch strap in combination with the waist belt.

Maintenance Features:

Cleaning:
- Fabric covers and trims can be spot washed using mild detergent and warm water. Allow to dry in a ventilated area away from direct sunlight.
- Avoid leaving the stroller in direct sunlight for prolonged periods to prevent fabric fading.
- Do not dry clean, machine wash, or tumble dry.
- Metal parts can be cleaned with a damp cloth, then wiped dry.
- Plastic parts can be cleaned with mild soap and water solution, then wiped dry.
Lubrication: Maintain the stroller by lubricating all metal moving parts with a silicone-based spray. Do not use heavy machine oil or grease as this can attract dirt or grit.
Inspection: Regularly check for loose or broken parts, sharp edges, and damaged components. Replace any damaged parts immediately. Inspect nuts and bolts regularly to ensure none have worked loose. Tighten as necessary.
Replacement Parts: Only use replacement parts and accessories that have been approved by the manufacturer. Failure to do so may invalidate the warranty.
Raincover Care: The product is supplied with one raincover for Stroller, Carry Cot, and Car seat modes. Place the raincover over the unit and secure with Velcro. Allow the raincover to dry before folding and storing in the basket to prevent mould and mildew. A raincover is not supplied for the car seat.
Padded Liners: Padded liners are supplied with the seat unit and car seat. They can be removed by threading the harness through the slots in the liner.
Shoulder Strap Height: The height of the shoulder straps can be adjusted by feeding the harness through the cut-out holes located on the seat unit.