To Next PageTo Next PageWhy is there a delayed ignition with my Red Mountain Valley 2A-OC148?
Delayed ignition in your Red Mountain Valley Outdoor Fireplace can occur due to several reasons. First, check the gas supply pressure, as low gas pressure could be the cause. Another potential cause is clogged or dirty burner ports. If this is the case, clean the burner parts.
How to fix an incorrect burner flame on a Red Mountain Valley 2A-OC148?
An incorrect burner flame in your Red Mountain Valley Outdoor Fireplace may be due to incorrect gas supply or pressure, so check the gas supply pressure. It could also be caused by clogged or dirty burner ports, in which case you should clean the burner parts.
Details risks of fire or explosion if gas is detected or instructions are not followed.
Specifies outdoor use only and precautions for storing flammable liquids or LP cylinders.
Warns about the odorless, deadly nature of carbon monoxide from the appliance.
Covers installation, maintenance, cleaning, surface temperatures, and water exposure.
Outlines specifications for LP gas supply cylinders, including DOT standards and overfilling prevention.
Informs about potential exposure to lead and carbon monoxide, linking to state warnings.
Verify all parts are included and follow assembly tips for a smooth process.
Emphasizes keeping the manual for future safety and maintenance reference.
Lists essential tools required for assembly, such as a Phillips screwdriver.
Details the types and quantities of hardware (bolts) required for assembly.
Provides detailed, sequential instructions for assembling the gas fire pit from start to finish.
Specifies the need for a flat, stable, outdoor, non-combustible surface away from obstructions.
Details placing the fire pit, adding glass rocks, securing the cylinder, and connecting the regulator.
Explains how to perform leak tests on gas connections using a soapy solution.
Ensures safety checks like clear ventilation, tight connections, and proper component assembly before operation.
Step-by-step guide on how to safely light the gas fire pit burner and adjust heat output.
Describes normal flame appearance and what to do if flames are abnormal or backfire occurs.
Instructions for safely re-lighting a hot unit and proper shutdown procedures.
Outlines procedures for cleaning exterior surfaces, burner areas, and checking for debris and blockages.
Provides instructions for storing the fire pit and LP cylinder, especially during winter or periods of non-use.
General| Brand | Red Mountain Valley |
|---|---|
| Model | 2A-OC148 |
| Category | Outdoor Fireplace |
| Language | English |
