Red Sound micro bpm - Technical Specifications; BPM Counter Specifications; Headphone Amplifier Specifications

SPECIFICATION
BPM Counter
BPM Range:
Lock-in time:
Accuracy:
Displays:
Headphone Amplifier
Frequency
Response:
Input level:
Output level:
High EQ:
Low EQ:
Stereo/Mono:
Accessories (included)
Input cable:
Mounting kit:
Connectors
Power Supply
Dimensions/Weight
Optional a
90 to 180 BPM
Typically2-4sec's(from introduction of readable beat information)
Display = 0.1 BPM Internal sample rate= 3mS
1 x 4 character 7 Segment (LED), Beat display (LED)
nominal 500mV (green/red input level LED)
2 watts RMS (8 ohms)
+/- 12dB @ 6.5kHz
+/- 12dB @ 100Hz
Switchable
1 Metre (3.5mm to 6.3mm plug),
2 x chrome brackets/2xM6screws/2xM6nuts/ ,
2 x double-sided adhesive pads,
4 x rubber feet
Audio input, Headphone output, AC power adaptor
17vDC, 320mA (RED PSU)
42(W)x195(D)x22(H)mm, Less than 0.5 Kg
20 Hz to 20kHz(+/-0.5dB)
2 x M3 screws
Allows the MICRO BPM to be used with club installations or where
a power supply may be unavailable. Provides up to 8 hours of mains-free
operation. Ask your dealer/distributor for availability.
ccessory
Rechargeable
Battery Pack
(BATT-01)
* Specification and /or appearance subject to change without prior notice due to product improvement.
Patent Pending
SPECIFICATION
PAGE
6