EasyManua.ls Logo

RED Hydrogen ONE - Taking photos

RED Hydrogen ONE
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
2. Tap Camera.
3. When you have composed your photo in the screen, tap to take the photo. Tap at the top of the screen to put the camera in 3D mode. Tap
to take a picture.
Tap RED Player to view the 3D photo or video you have taken. See Viewing 3D photos and videos for information on viewing options.
Taking quick photos
Press and hold the shortcut button to light up the screen and access the camera. After you have composed your photo in the screen, press the shortcut button
again to take the photo.
You can also swipe up on the icon in the bottom right corner of the lock screen to access the camera.
Selecting flash modes
When the camera is open, tap in the top right corner to quickly switch between the two flash modes: Program mode and Manual mode.
Program mode
When the camera is pointing at the subject of the photo, press the shortcut button or on the camera screen to take a photo with the appropriate level of
exposure, light and shade.
Manual mode
If you want to choose your own camera settings, select Manual mode to separately set the shutter speed and ISO.
: Drag this icon to adjust the shutter speed. The larger the value, the longer the camera will take to take a photo.
: Drag this icon to adjust the ISO. The larger the value, the greater the light sensitivity of the camera.