35
Changing imaging settings
1. When the camera is open, tap .
2. Tap IMAGING. You can:
•
Tap or to switch between photo and video modes.
•
When in photo mode, tap to set a timer for a photo.
•
Tap to adjust the camera’s default color tones. Tap SAVE LOOK to save the adjusted color tones. Tap LOAD LOOK to use the saved color
tone.
•
Tap to see the light histogram for the current scene being captured.
•
Tap to change the resolution of the front or back camera. When in photo mode, you can only change the photo resolution. When in video
mode, you can change the recording resolution and frame rate.
Managing files
1. When the camera is open, tap .
2. Tap FILES. You can:
•
Change the photo or video file format: Tap STILL FORMAT or VIDEO FORMAT. The file format name in the icon to the left of the file name will
change.
•
View saved files: Tap PHOTOS or VIDEOS to view the files saved on the device.
•
Change the file storage location: Tap STORAGE LOCATION and select a file storage location in the file view. Next, tap to add a new folder,
or tap to make the current location the default location for saving files.
Setting the focus method
1. When the camera is open, tap .
To Next Page
Loading...