Need help?Do you have a question about the RED RANGER GEMINI 5K S35 and is the answer not in the manual?
General| Sensor Type | CMOS |
|---|---|
| Sensor Size | Super 35mm |
| Resolution | 5120 x 2700 |
| Dynamic Range | 16.5+ stops |
| Recording Media | RED MINI-MAG |
| Frame Rates | Up to 120 fps |
| Recording Formats | REDCODE RAW |
| Mount Type | PL mount |
Details controls, buttons, and features of the camera body, including various views and LEDs.
Information on RED MINI-MAG SSDs and their part numbers for camera storage.
Lists compatible RED batteries, chargers, and power cables for the camera system.
Explains adaptors to use legacy RED displays with the RED RANGER camera.
Describes camera control devices that offer Record Start/Stop buttons.
Covers RED RANGER Shimmed PL Mount and interchangeable OLPF modules.
Information on support gear, mounting platforms, cables, and accessories.
Basic power operations, priority, consumption, status, and external DC power.
Step-by-step instructions for turning the RED RANGER GEMINI camera on and off.
Instructions for installing and removing camera handles and focus hook screws.
Guides for shimming the PL mount and swapping interchangeable OLPFs.
Details camera mounting points and recommended equipment for tripods.
Explains monitor outputs and categorizes video monitor signals for display.
Instructions for starting recording via camera, handles, or HD-SDI output.
Introduces the graphical user interface layout, organized into three sections.
Details the GUI elements in the Upper Status Row, including frame rate, ISO, and aperture.
Describes the Live Action Area display and lens information for supported lenses.
Explains the indicators in the Lower Status Row for camera mode, histogram, media, and power.
Covers Motion mode and Stills mode, including their respective features and settings.
Details the Histogram, RAW Level Bars, and Clip Meter for exposure monitoring.
Explains CAL, TC, GEN, SYNC, RM, LAN, WIFI indicators.
Displays the current supply voltage or remaining battery capacity.
Outlines conditions requiring sensor calibration, such as temperature or exposure changes.
Step-by-step procedure for performing manual sensor calibration on the camera.
Procedure for performing automatic sensor calibration, including exposure settings.
Covers applying, creating, deleting, renaming, exporting, and importing calibration maps.
Instructions on how to check the installed firmware version on the camera.
Step-by-step guide for upgrading the camera's firmware using an SSD.
Guidelines for cleaning camera body surfaces, EVF, and LCD screens.
Recommendations for storing the camera and handling water damage.
Procedure for conducting a stress test to ensure camera reliability and stability.
Addresses common issues like firmware, lens, display, and screen problems.
Explains critical failures, preset issues, and external control problems.
Details troubleshooting for error codes and buffer overflows.
Mechanical drawings of the camera's front, back, side, top, and bottom views (V-Lock).
Mechanical drawings of the camera's front, back, side, top, and bottom views (Gold Mount).
Instructions for removing and installing lens mounts on the camera.
Steps for mounting and dismounting PL lenses and supported lens types.
Details compatibility and setup for Fujinon and Canon PL mount lenses.
To Next Page
