Do you have a question about the RED EPIC-M RED DRAGON and is the answer not in the manual?
Sensor Type | CMOS |
---|---|
Mount | PL mount |
Resolution | 6144 x 3160 |
ISO Range | 200 |
Recording Formats | REDCODE RAW |
Recording Media | RED Mini-Mag |
Sensor Size | 30.7 mm x 15.8 mm (34.5 mm diagonal) |
Dynamic Range | 16.5+ stops |
Overview of the DSMC BRAIN as the central image capture component.
Details on DSMC media modules for SSD storage.
Description of DSMC power modules for battery options.
Information on RED lithium-ion batteries and charger solutions.
Overview of DSMC remotes and controls like Side Handle, RED Switchblade, REDMOTE.
Covers basic power management, including sources, priority, and shutdown procedures.
Details procedures for attaching and removing modules like Side Handle, Switchblade, and Adaptors.
Overview of the Lower Status Row, providing system information and camera values.
Basic controls for navigating DSMC menus, including touchscreen gestures.
Access to camera settings including Display, Look, Project, Audio, Setup, and Maintenance.
Displays power status and options for turning off the camera.
Settings for focus modes, zone, size, and enhanced autofocus.
Settings for Auto Exposure (AE) feature to maintain image brightness.
Instructions for configuring audio inputs, pre-amplifiers, and mix settings.
Information on genlock synchronization for video and audio systems.
Setup and operation for Master/Slave configuration for productions.
Procedures for connecting two DSMC BRAINs for 3D operation.
Instructions for syncing multiple cameras for camera array applications.
Configuration for Motion Control (MoCo) using GPIO signals.
Step-by-step guide to installing the latest DSMC firmware.
Procedures for sensor calibration (black shading) and checking noise profile.
Procedure for stress testing DSMC system reliability before projects.
Common issues and potential resolutions for firmware, peripherals, and module errors.
Details on the 75 ohm BNC connector for 3G-SDI video output.
Information on the 6-pin 1B LEMO DC input connector for power.
Description of DSMC lens mounts and the MOTION MOUNT system.