Need help?Do you have a question about the RED Epic and is the answer not in the manual?
General| Sensor | Mysterium-X |
|---|---|
| Resolution | 5120 x 2700 (5K) |
| Lens Mount | PL Mount |
| Frame Rates | 1-120 fps |
| Dynamic Range | 13.5 stops |
| Recording Format | REDCODE RAW |
| Media | REDMAG (SSD) |
| Weight | 5 lbs (2.3 kg) body only |
| Sensor Size | 27.7 mm x 14.6 mm |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
The central component housing image capture electronics and digital image sensor for the DSMC system.
Details the different RED sensors (DRAGON, MYSTERIUM-X, MONOCHROME) equipped in EPIC/SCARLET BRAINs.
Explains the R3D RAW data format and the REDCODE wavelet-based compression codec.
Highlights the DSMC's capability to simultaneously capture high-resolution video and still images.
Introduces REDCINE-X PRO as a toolset for editing, organizing, and preparing R3D files.
Details the DSMC BRAIN as the image processing center and its PWR/REC button and LEDs.
Describes DSMC media modules, including SSD side modules and their connectors.
Details the basic power operations of the DSMC system, including power inputs and turn on/off.
Guides users on setting up audio inputs, pre-amplifiers, and mix settings.
Details the REDMOTE controls, connectors, and color LCD display layout.
Provides methods for pairing the REDMOTE to a DSMC via dock or wirelessly.
Details the process for upgrading REDMOTE firmware using Mac or Windows.
Explains timecode as a sequence for footage/audio management and synchronization.
Guides on setting up and adjusting internal timecode generated by the camera.
Details how to set up and adjust timecode generated by an external device.
Defines genlock as a tri-level signal for synchronizing video and audio systems.
Details Master/Slave configuration for synchronized camera operation, common in 3D productions.
Provides procedures for connecting two DSMC BRAINs in Master/Slave for 3D operation.
Guides on setting up a camera array by syncing multiple cameras via Ethernet.
Explains Motion Control (MoCo) for automating camera movements using GPIO signals.
Details the process for installing the most recent camera firmware from the RED website.
Provides guidance on cleaning the sensitive camera sensor or OLPF.
Covers general troubleshooting steps for common DSMC issues.
Troubleshooting steps for firmware upgrade failures.
Steps for resolving issues where modules or lens mounts are not functioning.
Troubleshooting steps when the camera fails to recognize an attached lens.
Troubleshooting steps when the screen freezes or does not display.
Troubleshooting steps for critical failure or serious error messages during operation.
Troubleshooting steps for the specific 'Error 0x00000020' message.
Troubleshooting steps when the camera fails to turn on or boot up.
Guides on performing a Hard Restore to resolve camera firmware issues.
Troubleshooting steps for grainy images or footage.
Troubleshooting steps when timecode or genlock functionality is not working.
Technical specifications for the EPIC DRAGON camera model.
Technical specifications for the SCARLET DRAGON camera model.
Technical specifications for the EPIC MYSTERIUM-X camera model.
Technical specifications for the SCARLET MYSTERIUM-X camera model.
Provides a visual overview of the DSMC camera's menu structure.
To Next Page
