To Next Page

To Previous Page

RED DSMC OPERATION GUIDE: EPIC/SCARLET

955-0020_V6.0, REV-J | 12

SHOOT FOR VIDEO AND STILLS

High resolution video, such as the digital footage captured by the DSMC, has surpassed the detail necessary

to produce professional full-sized prints. Because of the ability to record at high frame rates and resolution, the

DSMC is ideally suited to capture video and still images, simultaneously.

The DSMC is equipped with a Stills mode that makes it easier to capture stunning images. With presets

optimized for stills and Swipe-Up Shortcuts for the RED Touch display, switching from Motion mode to Stills

mode is seamless. Using REDCINE-X PRO, or other editing applications supporting the RED SDK, you can pull

full resolution still images from R3D files.

NOTE: Stills mode is compatible with v6.0 firmware or later.

POST PRODUCTION WITH REDCINE-X PRO

REDCINE-X PRO is a professional coloring toolset, equipped with an integrated timeline and a post effects

software collection that provides the ideal environment to edit, organize, and prepare your R3D files.

RED TETHER, included in REDCINE-X PRO, allows you to record footage from your camera directly to a

computer or an external drive. Using tethering bypasses the need to record to an SSD and offload to a

computer later, saving you time.

NOTE: RED TETHER is included in REDCINE-X PRO build 35 or later.

Download the latest version of REDCINE-X PRO on the RED Downloads page at www.red.com/downloads.

REDCINE-X PRO

Other manuals for RED Epic

Questions and Answers:

Need help?

Do you have a question about the RED Epic and is the answer not in the manual?

General