To Next Page

To Previous Page

RED DSMC OPERATION GUIDE: EPIC/SCARLET

HDRX MENU

NOTE: HDRX mode cannot be modified when test signals are enabled.

NOTE: You cannot change the exposure when HDRX is enabled.

NOTE: You cannot use HDRX mode when:

‒ A MOTION MOUNT is installed.

‒ A Sensor Sync Mode (Genlock or MoCo) is enabled.

‒ Speed Ramp mode is enabled.

‒ A Frame Processing mode (Frame Summing or Frame Averaging) is enabled.

By default HDRX is disabled, and the HDRX indicator in the Lower Status Row is grey.

To enable HDRX, follow the instructions below:

1. Go to Menu > HDRX.

2. Select HDRX.

The HDRX text in the Lower Status Row turns white.

3. Select the number of Factors. The range is 1–6, and the default is 2.

4. Select which track you want the display to show:

‒ A Track: This track shows the video with the selected aperture and exposure settings applied.

‒ X Track: This track shows the video with the additional stops applied.

NOTE: For more information, see the High Dynamic Range Video with HDRx article, available at www.red.com/

learn/red-101/hdrx-high-dynamic-range-video.

FOCUS MENU

The Focus menu includes: Mode and Rack.

Other manuals for RED Epic

Questions and Answers:

Need help?

Do you have a question about the RED Epic and is the answer not in the manual?

General