RED DSMC OPERATION GUIDE: EPIC/SCARLET
COPYRIGHT © 2015 RED.COM, INC 955-0020_V6.0, REV-J | 57
CAMERA MODE
The Camera Mode allows you to seamlessly toggle between Motion mode, Stills mode, and Playback. To select
a camera mode, select the Camera Mode icon in the Lower Status Bar, swipe up, and select a camera mode.
NOTE: Setting adjustments made in Stills mode do not affect the settings in Motion mode, and vice versa.
NOTE: You can also switch between Stills and Motion mode by using the Motion/Stills switch on the DSMC Side
Handle and REDMOTE.
You can select the following camera modes:
“Motion Mode” on page 57
“Stills Mode” on page 57
“Playback Menu” on page 125
MOTION MODE
Motion mode optimizes your camera settings for capturing motion. This mode defaults the camera to Continuous
Record. Motion mode includes the following features:
Motion recording modes:
‒ “Continuous Record” on page 98
‒ “Internal Timelapse Timer” on page 98
‒ “Frame Trigger” on page 98
‒ “Speed Ramp Mode” on page 99
‒ “REDCODE Burst” on page 99
Swipe-Up Shortcuts
‒ Camera Mode
‒ Tools
‒ Media
‒ Power
NOTE: For more information, go to “Swipe-Up Menu” on page 62.
Default Motion Preset (RED)
NOTE: For more information, go to “Default Key Functions” on page 218.
STILLS MODE
Stills mode optimizes your camera settings for capturing stills. In Stills mode, the camera defaults to 6K 3:2,
REDCODE 3:1, Auto Exposure Single Shot, and Multi-Shot mode. Stills mode includes the following features:
Stills recording modes:
‒ “Multi-Shot” on page 100
‒ “Motion + Stills” on page 101
Swipe-Up Shortcuts:
‒ Auto Exposure
‒ Auto Focus
‒ Record Mode
NOTE: For more information, go to “Swipe-Up Menu” on page 62.
Default Stills Preset (RED)
NOTE: For more information, go to “Preset Default Key Functions” on page 221.
To Next Page
Loading...
Need help?
General
