COPYRIGHT © 2015 RED.COM, INC
RED DSMC OPERATION GUIDE
955-0020_V6.0, REV-D | 12
SHOOT FOR VIDEO AND STILLS
High resolution video, such as the digital footage captured by the RED DSMC, has surpassed the detail
necessary to produce professional full-sized prints. Because of the ability to record at high frame rates and
resolution, the DSMC is ideally suited to capture video and still images, simultaneously.
The DSMC is equipped with a Stills mode that makes it easier to capture stunning images. With presets
optimized for stills and Swipe-Up Shortcuts for the RED Touch display, switching from Motion mode to Stills
mode is seamless. Using REDCINE-X PRO, or other editing applications supporting the RED SDK, you can pull
full resolution still images from R3D files.
NOTE: Stills mode is compatible with v6.0 firmware or later.
POST-PRODUCTION WITH REDCINE-X PRO
REDCINE-X PRO is a professional coloring toolset, equipped with an integrated timeline and a post effects
software collection that provides the ideal environment to edit, organize, and prepare your R3D files.
RED TETHER, included in REDCINE-X PRO, allows you to record footage from your EPIC DRAGON or SCARLET
DRAGON directly to a computer or an external drive. Using tethering bypasses the need to record to an SSD
and offload to a computer later, saving you time.
NOTE: RED TETHER is included in REDCINE-X PRO build 35 or later.
Download the latest version of REDCINE-X PRO on the RED Downloads page at www.red.com/downloads.
REDCINE-X PRO
To Next Page
Loading...
Need help?
General
