RED DSMC OPERATION GUIDE
COPYRIGHT © 2015 RED.COM, INC 955-0020_V6.0, REV-D | 55
CAMERA MODE
The Camera Mode allows you to seamlessly toggle between Motion mode, Stills mode, and Playback. To select
a camera mode, select the Camera Mode icon in the Lower Status Bar, swipe up, and select a camera mode.
NOTE: Setting adjustments made in Stills mode do not affect the settings in Motion mode, or vice versa.
NOTE: You can also switch between Stills and Motion mode by using the Motion/Stills switch on the DSMC Side
Handle and REDMOTE.
You can select the following camera modes:
“Motion Mode” on page 55
“Stills Mode” on page 55
“Playback Menu” on page 123
MOTION MODE
Motion mode optimizes your camera settings for capturing motion. This mode defaults the camera to Continuous
Record. Motion mode includes the following features:
Motion recording modes:
‒ “Continuous Record” on page 95
‒ “Internal Timelapse Timer” on page 95
‒ “Frame Trigger” on page 96
‒ “Speed Ramp Mode” on page 96
‒ “REDCODE Burst” on page 97
Swipe-Up Shortcuts
‒ Camera Mode
‒ Tools
‒ Media
‒ Power
NOTE: For more information, go to “Swipe-Up Menu” on page 60.
Default Motion Preset (RED)
NOTE: For more information, go to “Preset Default Key Functions” on page 218.
STILLS MODE
Stills mode optimizes your camera settings for capturing stills. In Stills mode, the camera defaults to 6K 3:2,
REDCODE 3:1, Auto Exposure Single Shot, and Multi-Shot mode. Stills mode includes the following features:
Stills recording modes:
‒ “Multi-Shot” on page 98
‒ “Motion + Stills” on page 99
Swipe-Up Shortcuts:
‒ Auto Exposure
‒ Auto Focus
‒ Record Mode
NOTE: For more information, go to “Swipe-Up Menu” on page 60.
Default Stills Preset (RED)
NOTE: For more information, go to “Preset Default Key Functions” on page 218.
To Next Page
Loading...
