1
TABLE OF CONTENTS
• Symbols………………….........1
• Safety Instructions
and Warnings………………….2
• Product
Specifications.……………..…..7
• Assembly and
Operation….…………………...7
• Charging the
Battery……………….………....10
• Exploded View and Parts
List…………………………..…11
• Maintenance and Care………12
• Disposal……………………....13
• Guarantee/Warranty…..…….13
• Declaration of
Conformity………………….14
.
SYMBOLS
General Safety Warnings.
1. After release the On/Off switch,
the cutter bar continues running
briefly. Risk of injury!
2. To protect against injury from the
cutter blade, have a specialist
garage perform all work such as
replacing or regrinding the cutter
blade (special tools required).
3. Before performing any
maintenance and cleaning work
on the garden tool, remove the
battery.
4. Protect the battery contacts when
the battery is not being used.
Loose metal parts may short-
circuit the contacts – Explosion
and fire hazard!
Before using the tool, read
the operating manual. Read all safety
warnings and all instructions including
the currently valid site rules and
regulations for the prevention of
accidents. Failure to follow the warnings
and instructions may result in electric
shock, fire and/or serious injury.
Remove the safety key
before carrying out any
work on the unit and
before leaving the unit.
Sharp cutting tool! Keep
hands and feet away
from the cutter bar! Wear
protective gloves if possible
Do not throw batteries
and other electrical
products into the
household waste, fire, or water.
To Next Page
Loading...
