8
Assembly
Attaching The Handle Bar
One screwdriver is required to attach
the handle bar.
1. Fold the lower handle upwards.
Insert one screw into the hole and
fasten the bar with the screw.
2. Place the upper handle on the
lower handle.
3. Attach the upper handle.
4. Insert the threaded bolt through
the holes in the upper handle and
the lower handle. Fasten the
screw with the triangle knob.
Attaching The Grass
Catcher
1. Lift the back cover of the mower.
2. Hook the grass catcher bag into the
lawn-mower.
3. Fold the back cover down again.
Adjusting The Cutting
Height
The cutting height can be adjusted from
0.98” to 2.95”.
1. Pull the handle outwards slightly.
2. Set the required cutting height.
3. Release the lever again.
To Next Page
Loading...
