27
1B. WALL MOUNTING PROCEDURE
For wall-mounting the REDCAT System: To hang
the system on a wall, drill these four holes.
REQUIRED MATERIALS
UÊ Drill Bit: 1/4” Drill Bit
UÊ Anchors: Needed for mounting on drywall
UÊ Screws: wood screws or screws appropriate
for anchors
MOUNT
UÊ Èn½Ê>LÛiÊÌiÊyÀ°ÊV>ÌiÊÜÌÊÇÊvÌÊvÊ>ÊÜ>Ê
outlet.
LOCATION
UÊ Find a location as far away as possible from
the teacher who will be using the mic. The
best place is centered on the long wall
opposite the teacher. Avoid placing the
REDCAT on any wall close to where the
teacher usually stands to instruct the class.
Having the teacher’s mic too close to the
REDCAT can result in feedback.
To Next Page
Loading...