36
4. CHARGING THE REDMIKE
Before use, the REDMIKE should be charged.
It will take 8-9 hours for the REDMIKE to obtain
a full charge. A fully charged REDMIKE will last
for over 7 hours of use. If microphones are used
daily, they should be kept in the cradle.
A red light on the charging cradle indicates the
REDMIKE is charging. A green light indicates that
charging is complete and a full charge has been
reached. A blinking light indicates a charging
or sensing error. See Troublshooting section for
more information.
REDMIKE incorporates alkaline protection into
the microphone design. Always use a Lightspeed
rechargeable sensing battery. Replacement AA
NiMH batteries may only be purchased through
Lightspeed Technologies (part # NH2A27).
To Next Page
Loading...