43
USING REDMIKE AS WIRELESS AUDIO LINK
The REDMIKE includes a 3.5mm audio input jack
to connect to an audio source like a laptop or
MP3 player. The REDMIKE will transmit the audio
signal to be played through the system.
If your system includes two REDMIKEs, we
recommend using Channel B (student mike) to
amplify the external audio equipment so the
teacher’s volume on the Channel A (teacher
mike) does not have to be adjusted.
To determine which REDMIKE is set to Channel
B, you can look at the switch on the back of the
mic or speak into one of the microphones.
To Next Page
Loading...