37
4. CHARGING THE REDMIKE CONT’D
1. Plug power cord into the cradle charger and
then plug the AC end into an electrical outlet.
NOTE: The power supply for countries outside
the USA and Canada has interchangeable
power plug adapters. Select the correct
adapter for your country.
2. Ensure that the REDMIKE is turned OFF.
3. Place the REDMIKE into the cradle. The
LED on the cradle will glow RED indicating
charging has started. When the REDMIKE is
fully charged the LED on the cradle charger
will change to GREEN.
To Next Page
Loading...