This document describes the "Feed Me Combi 4in1" highchair, lo chair, booster seat, and stool, manufactured by Red Kite. It provides a comprehensive guide to its assembly, usage, maintenance, and safety information.
The Feed Me Combi is a versatile seating solution designed to adapt to a child's growth, offering four different modes of use: High Chair, Lo Chair, Booster Seat, and Stool. This adaptability makes it a long-lasting and practical investment for parents.
Parts List:
The product comes with a detailed parts list to ensure all components are present for assembly. Key components include:
- Long leg: Two pieces, with and without a screw hole, forming the main support structure.
- Long plastic foot cover: Two pieces, labeled L and R, for the long legs.
- Short leg: Four pieces, used for the lo chair and stool configurations.
- Side frame: Two pieces, used in various configurations.
- Tray: One piece, including a flexi feeding tray, for mealtime use.
- Footrest: One piece, providing comfort and support for the child's feet.
- Seat cover and back rest: One piece, providing cushioning and support for the child.
- Seat Panel: One piece, forming the base of the seat.
- Belts for booster: Two pieces, for securing the booster seat.
- Screw: Four pieces, for assembly.
- Allen key: One piece, for tightening screws during assembly.
- Seat panel cap: Two pieces, for covering screw holes on the seat panel.
- Short plastic foot cover: Two pieces, labeled L1 and R1, for the short legs.
- Side frame lo chair: Two pieces, specifically for the lo chair configuration.
- Rear frame for highchair: One piece, providing additional support for the highchair.
Function Description and Usage Features:
The Feed Me Combi offers four distinct modes, each catering to different stages of a child's development:
-
High Chair Mode: This mode is designed for feeding infants and toddlers at table height.
- Assembly: Involves inserting the long legs into the seat panel, attaching the side frames, and securing the rear frame. The tray can be attached and removed as needed.
- Tray: The tray can be easily attached and removed by pressing the "Press and lift" buttons. It includes a flexi feeding tray for convenience.
- Adjustments: The seat panel can be adjusted to different positions by pulling the catches and sliding the tray back and forth.
- Safety: The highchair should always be used with the harness system to secure the child.
-
Lo Chair Mode: This mode provides a lower seating option, suitable for toddlers who can sit independently.
- Assembly: Similar to the highchair, but uses the short legs and side frames designed for the lo chair.
- Tray: The tray can still be used in this mode, offering a convenient surface for play or meals.
- Adjustments: The seat panel and tray adjustments remain similar to the highchair mode.
-
Booster Seat Mode: This mode allows the child to sit at a dining table with adults, using an existing adult chair.
- Installation: The booster seat is installed on an adult chair using the provided belts. The belts are threaded through slots on the bottom of the seat and around the backrest of the adult chair.
- Safety: Ensure the buckles are not resting against any framework of the adult chair and are pulled tight to take up any slack.
- Adult Seat Dimensions (WARNING):
- The width of the adult chair should not be less than 33.8 cm.
- The depth of the adult chair should not be less than 28 cm.
- The height of the adult chair backrest should not be less than 42 cm and not over 63 cm.
- The width of the adult chair backrest should not be less than 40 cm.
- It is crucial to follow these dimensions to ensure stability and safety.
-
Stool Mode: This mode transforms the product into a simple stool, suitable for older children.
- Assembly: Involves removing the seat from the seat panel and inserting the two seat panel caps.
The product features a 5-point harness system to secure the child in the highchair and lo chair modes.
- Adjustment: To secure and adjust the harness, slide the waist harness (A) into the shoulder strap (B) and then push in to the central buckle housing (C). Use the sliders on the harness to achieve a snug and comfortable fit.
- Release: To release the buckles, simply push the button in the centre of the buckle housing.
- IMPORTANT: Always use the restraint system.
Maintenance Features:
Regular maintenance is essential to ensure the safety and longevity of the product.
-
General Care:
- The correct care and maintenance of this highchair is essential.
- Always ensure the highchair is stored in a dry place to prevent mould or mildew developing.
- Avoid leaving your highchair in direct sunlight for prolonged periods of time as this may cause premature fading of colours.
-
Cleaning:
- Metal parts: May be cleaned with a damp cloth and wiped dry with a soft cloth.
- Plastic parts: May be cleaned with a mild detergent solution. Rinse with water and wipe dry.
- Seat cover: Should be cleaned with a mild detergent solution. Do not submerge in water. Rinse and wipe dry. Do not use abrasives, cleaners, or bleach.
- Flexi feeding tray: Can be removed and cleaned in the dishwasher.
-
Maintenance Checks:
- Check that nothing is broken, torn or missing and that no sharp edges have been exposed. Stop using the highchair immediately if any are found.
- Inspect all studs, nuts and screws for tightness. Check that all straps and harness attachment points are in good working order.
- Do not replace component parts other than those approved by the manufacturer or distributor. Failure to do this may invalidate your warranty.
Safety Warnings:
Comprehensive safety warnings are provided for all modes of use.
Technical Specifications:
- Tested to: BS EN 14988:2017+A1: 2020 / BS EN 16120 + A2: 2012: 2016 / BS EN 17191: 2021.
- Customer Care Line: 01454 326 568.
- Importer: The Red Kite Baby Co Ltd, 35 Lovern Road, Beech Industrial Estate, Yate, Bristol, BS37 5QX, UK.
This comprehensive manual ensures users have all the necessary information to safely and effectively use the Red Kite Feed Me Combi 4in1 product.
Need help?
General
To Next Page
