•
Image size : 30M:7392x4160; 24M:6544x3680; 20M:5888x3312;
16M:5376x3024; 12M:4608x2592; 8M: 3840x2160;
5M:2960x1664; 3M:2400x1344; 2M:1920x1088
Select the desired resolution for photos. We recommend the resolution 8M.
A higher resolution produces a somewhat better photo quality but results
in larger files requiring more space on the memory card. 30M, 24M, 20M,
16M, 12M and 8M resolutions are generated by interpolation which can
also affect quality.
Side PIR Setup: Off/On
The two side PIR sensor zones provide a wide detection angle and detect
more potential triggers.
Sometimes you only wish to observe a certain point.
Too many irrelevant triggers from the side sensor zones outside of this
point continuously switch the camera on and off, considerably affecting
battery life. In some situations it may be difficult to remove interfering
branches or avoid sun light. In these situations you can switch off the
side sensor zones.
•
Low Bat Night Shot: No IR Led/ No Shutting
•
Monitoring Period: Off/On
Set timer to "On" if camera should only be active within a certain time.
Once "On" has been confirmed with the OK button, the start and end time
can be set.
If the start time is, for instance set to 18:35 hrs and the end time to 8:25
hrs, the camera will be operational from 6:35 pm of the current day until
8:25 am of the following day. The camera will not be triggered and will
not take any photos or videos outside of this period.
•
No IR Led: The camera takes photos and videos without opening IR
LEDs at night when battery is quite low.
No Shutting: The camera doesn't take photos and video at night when
the battery is quite low.
-
-
To Next Page
Loading...