Note:
If you forgot your password, please unlock the camera with password
“OPEN”.
•
Date Stamp: On/Off
Select "ON" to print the date, time, temperature, battery percentage and
moon phase on each photo or video. Otherwise select "Off".
Password Setting: Off/On
After selecting "On" enter a four digit password to protect your camera
against unauthorised access.
This password must be entered each time the camera is switched on in the
SETUP mode before the camera can be used.
•
•
WiFi SSID: 4K WIFI CAM****
You can use a combination of 10 digits and 26 letters to document the
location on the photos and videos. When using several cameras this makes
it easier to identify the location when viewing photos and videos.
•
Bluetooth: Off/ On
•
•
Camera name: 4K WIFi CAM****
You can use a combination of 10 digits and 26 letters to document the
location on the photos and videos. When using several cameras this makes
it easier to identify the location when viewing photos and videos.
•
Beep Sound: On/Off
•
Format: Cancel/OK
All files are deleted by formatting the memory card. Press OK button and
confirm formatting by selecting "OK".
We recommend formatting the memory card if it has already been used in
other devices or if it is a new card.
Caution: Ensure that files still required have been backed up prior to
formatting!
•
Date / Time
:
Set date and time
•
•
Time Format: 12hour/ 24hour
To Next Page
Loading...