EasyManua.ls Logo

RedLeaf RD3019Pro - Page 22

RedLeaf RD3019Pro
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
In replay mode the option Delete and protect are is available in the menu.
Delete: Select the “Delete” option to remove individual or all photos and
videos from the memory card thus making storage room for new photos
and videos.
Delete All: Select option “All” to delete all photos and videos on your
memory card. To confirm deletion of all your photos and videos, select
“Yes” and press the OK button. Select “No” to interrupt the deletion
operation.
Protect: Lock Current/ Unlock Current/ Lock All/ Unlock All.
Delete Current: Using this option you can delete individual photos and
videos. After selection the option by pressing the OK button, the photo
and video to be deleted is shown. Confirm deletion by selecting “Yes"
and confirming the selection by pressing the OK button. To end the
deletion process, select “No” and confirm by pressing OK.
Backlight: 1Minute, 3Minutes, 5Minutes, Off
The LCD monitor would automatically turn off after the setting time.
Version:
You can check the software version.
Mcu FW Update
WiFi Password: Default 12345678
Auto WiFi Off: 1Minute,
2Minutes, 3Minutes
If the camera turns on the WiFi hotspot, but the phone doesn’t connect to
the WiFi hotspot successfully within selected time, then WiFi hotspot will
disconnect automatically and the camera will return to SETUP mode or ON
mode.
Auto Power Off: 3 min/5 min/10 min/Off
If there is no operation more than the selected time, then the camera will
turn off automatically in SETUP mode.