To Next PageTo Next Page
Need help?Do you have a question about the RedMax BCZ2401S and is the answer not in the manual?
General| Engine Type | 2-stroke |
|---|---|
| Engine Displacement | 24.5 cc |
| Power Output | 0.8 kW |
| Fuel Tank Capacity | 0.5 L |
| Shaft Type | Straight shaft |
| Starter System | Recoil starter |
| Cutting Width | 230 mm |
Explains warning symbols used in the manual.
Describes the meaning of WARNING, IMPORTANT, and NOTE symbols.
Identifies major components of the brushcutter.
Provides key performance and dimension data for the unit.
Displays and explains safety labels affixed to the product.
Explains operational symbols marked on the unit.
Outlines required gear and environmental conditions for safe use.
Details work planning, rest periods, and specific operational warnings.
Detailed steps for starting, operating, and shutting down the engine.
Advises on proper usage and material cutting.
Safety measures when others are near the operating area.
Safe practices for refueling and moving the unit.
Steps for mounting the engine and connecting drive components.
Procedures for connecting the throttle cable and electrical switch wires.
Procedures for attaching the handle and debris guard.
Steps for attaching the cutting attachment.
Provides the correct gasoline-to-oil mixture and chart.
Detailed instructions on how to mix fuel and refuel safely.
Discusses the effects of different fuel types and aged fuel.
Detailed steps for starting, operating, and shutting down the engine.
Instructions for adjusting the throttle cable and engine idling speed.
Guidance on using the cutting head for trimming grass and weeds.
How to adjust the cutting line length during operation.
Overview of maintenance tasks, intervals, and components.
Specific instructions for filters, spark plug, muffler, etc.
Lubrication and cleaning of gear case and cooling vents.
Tasks for 100-hour intervals, storage, and disposal.
Covers installing blade kits, choosing blades, and initial setup.
Discusses cutting methods, blade thrust control, and maintaining user control.
Details blade sharpening, care, and safe transportation.
Common causes and solutions for engine not starting.
Troubleshooting problems with the engine running or restarting.
Information regarding genuine parts, ordering, and availability.
Details coverage periods for emission-related and other parts.
Lists conditions voiding warranty and owner's duties.
