RedMax EBZ8550 - Maintenance

To stop the product : EBZ8550
CAUTION: Do not stop the product at full
speed.
1. Push the stop switch.
Maintenance
Introduction
WARNING: Read and understand the safety
chapter before you do maintenance on the
product.
Maintenance schedule
Maintenance Daily Weekly Monthly
Clean the external surface. X
Make sure that the throttle control operates correctly. X
Make sure that the stop switch operates correctly. X
Do a check of the stop switch, refer to To stop the product : EBZ8550RH on
page 12 .
X
Examine the engine, the fuel tank and the fuel lines for leaks. X
Clean the air filter. Replace if it is necessary. X
Tighten nuts and screws. X
Examine the fuel filter for contamination and the fuel hose for cracks and other
defects. Replace if it is necessary.
X
Examine the air intake and make sure that it is not blocked. X
Examine the starter and the starter rope for damages. X
Examine the vibration damping units for damages and cracks. X
Examine the spark plug, refer to To do a check of the spark plug on page 14 . X
Clean the cooling system. X
Clean the external surface of the carburetor and the area around it. X
Clean the fuel tank. X
Examine all cables and connections. X
Examine and clean the spark arrester screen on the muffler. X
Replace the spark plug. Make sure it is attached with a supressor. X
962 - 003 - 01.02.2019 13