RedMax HB2300 - HOW TO INSTALL THE AIR INLET SCREEN TO THE VOLUTE COVER; Storage; BEFORE STORING THE BLOWER

12 
■ HOW TO INSTALL THE AIR INLET
SCREEN TO THE VOLUTE COVER
•Put the mark ▲▲ of the air inlet screen to the
mark ●● of the volute cover in line.
•Turn the air inlet screen clockwise (arrow
direction) and make sure it is firmly
installed.
Storage
BEFORE STORING THE BLOWER:
1.Drain a fuel tank and push the primer bulb
until it becomes empty of fuel.
2.Remove the spark plug and drop a
spoonful of 2-cycle oil into the cylider.
Crank the engine several time and replace
the plug.
Maintenance
•Install the screw through the stopper to
insure that the air inlet screen does not
move