The MIDI OUT
MIDI stands for Musical Instrument Digital Interface. No sound is transmitted through the MIDI interface, only data.
Sound is generated by the connected MIDI tone equipment. You may play the chanter with any sound the conneced
equipment is capable of producing.
The DIN plug meets the MIDI standards and may be connected to any MIDI equipment (also personal computers which
are equipped with a MIDI interface).
A single MIDI interface is capable of transmitting 16 MIDI channels. The redpipe uses channel 1 for the chanter data,
and channels 2 to 4 for the Drones.
1 chanter (see fingering-charts)
2 58 (Tenor Drones)
3 46 (Bass Drone)
4 53 (Baritone Drone)
To prevent missing Note-Off signals, always stop the sound before switching off the slide switch.
e-pippes on press SOUND and - and then switch on the redpipe
e-pippes off press SOUND and + and then switch on the redpipe
To Next Page
Loading...