The main machine has 2 working modes, which can be switched according to different clean
needs.
Press the host tigger to start working, release the tigger to stop the operation immediately.
Mode 1: discontinuous working mode
In standby mode, long press "○" for 1.5 seconds to turn on the continuous working mode, then
" "will appear on the screen, and press the button for 1.5 seconds again to turn off the
continuous working mode. The use of continuous operation mode can free your fingers and
aviod fatigue of the constant pressing on the tigger.
Mode 2: Continuous working mode
Clean mode
Product use
.
In the running state of this mode, it can be suspended or re-started by short-press switch, and
the working mode of the main machine will not change.
.
If you need to exit the continuous working mode, press the "○" key and hold for a longer
time.
Tip:
9
Eco
To Next Page
Loading...
