Redsbaby SKIP - Assembly Instructions; Frame Assembly; Wheel and Basket Assembly; Brake Component Assembly

1514
SKIP STROLLER ~ INSTRUCTION MANUAL SKIP STROLLER ~ INSTRUCTION MANUAL
Assembly instructions
Frame
The frame will come fully assembled on your Redsbaby
SKIP.
Front and back wheels
The front and back wheels will come fully assembled on
your Redsbaby SKIP.
Seat, canopy and basket
The seat, canopy and basket will come fully assembled on
your Redsbaby SKIP.
Brake component
The brake will come permanently assembled on your pram
frame and is located in the middle of the frame and is red
in colour.
Using your
Redsbaby SKIP
To release the frame from the
folded position:
1. Place the folded stroller on the ground with the handle
bar facing upward and close to your body.
2. Unlatch the red frame fold lock on the side of the SKIP
and push the frame away.