EasyManua.ls Logo

Reebok FR30 - Page 8

Reebok FR30
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WWW.REEBOKFITNESS.COM 15
14 FR30 BIKEROWER TRENINGOWY
FR30
ENG
COMPUTER PROGRAMS
2
3
5
9
10
11
1
4
6 7 8
CONSOLE FR30
QUICK START
Press STARTPAUSE to begin workout. Adjust resistance
(32 levels) at any time by pressing +/- .
MANUAL MODE P01
• In standby, press (MMODE to highlight P01, then press STARTPAUSE
to start workout. All values of TIME/DISTANCE/CALORIES will count up
from zero
• In standby, press (MMODE to highlight P01, and then press (MMODE
again to highlight TIME/DISTANCE/CALORIES. Press +/- to adjust vaues
• If the value is set above zero, press STARTPAUSE to start workout, and
all values will count down
• When completed, the console will display "End" and beep.
• Press RESET to enter main interface
PRESET PROGRAMS P02  P19
• In standby, press (MMODE to highlight P01, then press +/- to select
P02 – P19
• Press (MMODE again to enter. Adjust TIME/DISTANCE/CALORIES
values, or do not set parameters and press START/PAUSE to train
• User can select the 18 programs to exercise according to individual
needs
• Press +/- to change the program resistance level at any time
during exercise
• achine will beep constantly and show END when the program
is finished
BODYFAT TEST P20
• In standby, press MODE to highlight P01, then press +/- to
select P20
• Press MODE to enter information. Set value with +/- from F-1 to F-4
F1 SEX 01 MALE, 02 FEMALE
F2 AGE 10  99
F3 HEIGHT 100  200CM 40  80 IN
F4 WEIGHT 20  150KG 44  330LB
• Press (M MODE to enter F-5 (F-5 BODY FAT TEST),
hold hands on the hand pulse sensors, the console
will display your body fat value.
≤19 UNDER WEIGHT
20  25 NORMAL WEIGHT
26  29 OVERWEIGHT
≥30 OBESE
The body fat value is intended as a guide, and is not medical data.
HEART RATE CONTROL MODE P21P23
• In standby, press (MMODE to highlight P01, then press +/- to select
P21-P23. Press (MMODE again to enter
• Press +/- buttons to set age (console will calculate maximum heart rate
according to age)
• Press (MMODE and +/- to set TIME, DISTANCE, CALORIES; then
press STARTPAUSE and place both hands on the pulse sensors
to start workout
Console will record the TARGET HEART RATE and allow user to work out
within this, the resistance level will automatically be adjusted according to
the heart rate.
If the user heart rate exceeds the HRC target, the console will beep and
remind the user to reduce the amount of exercise.
HRC target calculation formula:
HP1: THR = (220 – AGE)*60%
HP2: THR = (220 – AGE)*75%
HP3: THR = (220 – AGE)*85%
USER PROGRAM MODE P24  P27
• In standby, press (M MODE to highlight P01, then press + to select
P24 – P27. Press (M MODE to enter user-defined program
• Press + to set TIMEDISTANCECALORIESHEART RATE
• Press (M MODE and + to set the resistance value of each segment
of S01 – S20
• Press STARTPAUSE to start training
HEART RATE RECOVERY P28
• In standby, press (MMODE to highlight P01, then press +/- to select
P28. Press (MMODE to enter HEART RATE RECOVERY program
• When running, press (MMODE to directly access HEART RATE
RECOVERY
• Place both hands on the pulse sensors, the console will count down for
60 seconds and display the heart rate and the RECOVERY level F1-F6.
• Press RESET to exit
F1 EXCELLENT F4 FAIR
F2 VERY GOOD F5 BELOW AVERAGE
F3 GOOD F6 POOR
NOTE: Do not remove your hands from pulse sensors or the reading will not
be given during testing. The pulse monitor is a guide for reference only and
not for medical use or monitoring.
POWER SAVE FUNCTION
This product is fitted with a power saving mode which will activate if the
machine is inactive for a period of 4 minutes. To restart the machine, simply
press any key or pedal.
MPH TO KPH CONVERSION
In standby, press and hold the +,- keys for 3 seconds to enter the
conversion mode. Then press the +,- keys to select between 1-KPH
or 0-MPH. Press RESET to quit.
Note:
1. Keep the console far away from humid and corrosive environment.
2. Non-professional personnel do not disassemble and change.
TIME
DISTANCE
RESISTANCERPM
SPEED
START/PAUSE
Start, pause or hold to reset.
(-) DOWN
Adjust function value down.
MODE
Switch function, or press to enter
heart rate recovery
(+) UP
Adjust function value up.
CALORIES
WATT/HEART RATE
RESET
Press the button to return or reset.
Press and hold to restart.
1
3
2
8
6
7
4
5
10
9
11
FR30 BIKE_(RVFR-10500) PL MANUAL V3 29.07.24.indd 14-15
FR30 BIKE_(RVFR-10500) PL MANUAL V3 29.07.24.indd 14-15
29/07/2024 16:46
29/07/2024 16:46