Reebok inversion table RBBE1996.1 - Page 7

7
2. Attach the Left Base (1) to the Right Base (2)
with two M10 x 80mm Button Bolts (52), four
M
10 Curved Washers (50), and two M10
Nylon Locknuts (65).
Attach another Foot (42) to the Right Base (2)
with an M4 x 20mm Screw (71).
3. Attach the Support Leg (13) to the Center
Base (3) with three M10 x 35mm Button Bolts
(53) and three M10 Nylon Locknuts (65).
Attach the Base Plate (14) to the Center Base
(3) with four M5 x 25mm Screws (59).
4.
Attach the Support Bracket (15) to the Support
Leg (13) with two M4 x 15mm Screws (58).
2
2
1
52
50
5
0
6
5
71
42
13
59
59
65
53
3
53
14
3
13
58
58
4
15