Reebok Spin Trainer Rx 3.0cwl Bike - Page 10

10
10
10. Attach the Seat (9) to the Seat Carriage (3) with
four M6 x 38mm Patch Screws (81) and four
M6 Washers (44) (only two of each are shown).
Note: The Patch Screws and Washers may
be preattached to the underside of the Seat.
9
44
81
44
3
9
. Tip: Do not pinch the Game/Pulse Wire (58).
Attach the Backrest (8) to the Seat Carriage (3)
w
ith two M6 x 18mm Patch Screws (77) and
two M6 x 42mm Patch Screws (51).
Tip: First tighten the M6 x 18mm Patch
S
crews (77), and then tighten the M6 x
42mm Patch Screws (51).
See step 8. Tighten the M10 Locknuts (87).
9
8
77
51
3
58