Reed Instruments R6020 - Operating Instructions; Software Installation Guide; Battery Installation and Replacement

5
Instrument Description
1. Protective Cover
2. USB Connector
3. Start Button
4. RH & Temperature Sensors
5. Mounting Clip
6. RecordLED(Green)
7. AlarmLED(Red/Yellow)
Operating Instructions
Software Installation
Install the included software by placing the supplied program disc in the
PC's CD-ROM drive. If the installation program does not automatically start,
open and browse the CD-ROM drive from your computer. Double click on
the setup le and follow the on-screen prompts to install the software.
If your computer does not have a CD drive please visit
www.reedinstruments.com/softwaretodownloadthelatestR6020software.
Battery Installation or Battery Replacement
A3.6VbatteryisprovidedwiththeR6020.Pleasenotethatonlya3.6V
battery should be used with the instrument. In order to install the battery
follow the steps below:
1. Use a small athead screwdriver to open the casing
2. Slidethecasingofftoexposethebattery
3. Install(orreplace)thebattery
4. Slide the casing back on the instrument
continued...
2
3
4
5
6
7
R6020
DATA LOGGER
1.800.561.8187 info@REED-Direct.ca
REED-Direct.ca