e) Tonearm was designed and tested in
various real life situations, so possibility to
damage LP or cartridge is no bigger than
using conventional tonearm with
antiskating mechanism.
f) In every situation when you are not sure
what is happening, lift up armtube using
microlift, move armtube in a way that laser
beam was pointing to the center of a
sensor grid, and press “On/Off” button.
g) Please avoid applying force and swift
movements when touching armtube. If light
[2] started to blink red (Figure 22), it
means that tonearm operation was
overloaded. In such case, please perform
Step 10-f of this User manual.
To Previous Page
Loading...