REED 5T - Page 2

Figure 1
Video link for Reed 5T mounting:
https://www.youtube.com/
watch?v=44HMDmE5aZg&t=166s
1. Tonearm unpacking:
a) Please read the User Manual (Figure
1) before starting to assemble the
Reed 5T tonearm. Not following
assembly instructions may
permanently damage the tonearm.
Figure 2
b) Remove the top packaging layer.
Take out the template [1],
armwand base [2b] and tonearm
body [3] (Figure 2).
Figure 3
c) Take out the middle layer of
packaging.
Take out all the accessories [1],
except pivoted armwand [2a] and a
counterweight [4] (Figure 3).
Tonearm consists of pivoted
armwand [2a], armwand base [2b],
tonearm body [3], tonearm base
[3a] and armwand base pad [3b]
(Figure 3).
1
2a
4
2b
3
3a
3b
1
2b
3