OPERATION and MAINTENANCE
B20HPC-SKE-V25 71 of 75
Chino, CA 91710
reedpumps.com
EVERY 250 HOUR MAINTENANCE CHECKLIST
Change hydraulic filters (or change more frequently as indicated by indicator
gauge on filter)
Check that all electrical wires, cables, terminals, plugs are in good condition
Change engine oil and filters (see engine manufacturer guide for all engine
requirements) IF REQUIRED
Check condition of fuel hoses, fittings, and clamps
Inspect all safety decals to ensure that they are completely visible and legible
Perform complete inspection of the controls
All toggles in good condition, stay in position or momentarily return to center
Control identification in good condition, legible
Perform complete inspection of the controls
All toggles in good condition, stay in position or momentarily return to center
Control identification in good condition, legible
To Next Page