OPERATION and MAINTENANCE
B20HPC-SKE-V25 73 of 75
Chino, CA 91710
reedpumps.com
EVERY 500 HOUR MAINTENANCE CHECKLIST
Inspect hydraulic hoses and fittings for any signs of external wear or damage
Inspect all wear parts and change as necessary (excessive wear may cause
inefficient performance and/or shutdown of operation)
Change hydraulic fluid, clean the reservoir and the suction strainers within
reservoir, and replace all hydraulic oil filters
Complete inspection of the engine (refer to engine manufacturer maintenance
schedule for details) IF REQUIRED
Inspect mountings, bolts, brackets
Oil level proper, coolant level proper, check for leaks
Fuel system, tank mounting, filter condition, check for leaks, damaged lines
Air cleaner and muffler securely mounted IF REQUIRED
To Next Page