To Next PageTo Next Page
Need help?Do you have a question about the REED R6020 and is the answer not in the manual?
General| Model | R6020 |
|---|---|
| Type | Temperature and Humidity Data Logger |
| Measurement Parameters | Temperature, Humidity |
| Humidity Range | 0 to 100% RH |
| Humidity Accuracy | ±3% RH |
| Humidity Resolution | 0.1% RH |
| PC Interface | USB |
| Power Supply | 3.6V Lithium Battery |
| Battery Life | Up to 1 year |
| Temperature Range | -40 to 70°C (-40 to 158°F) |
| Temperature Accuracy | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Memory Capacity | 16, 000 readings |
| Sampling Rate | 1 second to 24 hours |
| Software | Windows compatible software |
| Operating Environment | -40 to 70°C (-40 to 158°F), 0 to 100%RH |
Highlights the logger's memory capacity, dew point indication, logging modes, selectable cycles, alarm thresholds, LED status, USB interface, and analysis software.
Details the numbered parts of the R6020 data logger, including the protective cover, USB connector, start button, sensors, and LEDs.
Explains the meaning of REC and ALM LED states, including off, single/double green flashes, single/double red flashes, and single yellow flashes.
Details the actions corresponding to LED indications: starting logging, delayed start, low alarm, high alarm, low battery, and memory full.
Describes how to change LED flashing cycles and disable alarm LEDs via software for power saving.
Explains LED behavior during simultaneous alarms and automatic disabling of recording operations when the battery is low.
Details how to use the datalogger graph software for setting a delay and initiating recording via the start button.
Provides a step-by-step guide for replacing the 3.6V lithium battery, including opening the casing and inserting the new battery.
Includes important notes on battery capacity loss from prolonged USB connection and warnings for careful handling and disposal of lithium batteries.
