REED SD-3007 User Manual

Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black
Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
Model
Instruction
Manual
Humidity/Temperature
Datalogger
SD-3007
reedinstruments
www
com

REED SD-3007 Specifications

General

Measurement Parameters	Temperature, Humidity
Accuracy (Humidity)	±3%RH
Resolution (Humidity)	0.1%RH
Interface	USB
Humidity Range	0 to 100%RH
Resolution (Temperature)	0.1°C
Battery Life	1 year
Weight	100 g
Sampling Rate	User selectable: 1 sec to 24 hours

Summary

Features

Specifications

Humidity and Temperature Specifications

Details range, resolution, and accuracy for humidity and temperature measurements.

Dew Point and Wet Bulb Specifications

Covers range and resolution for dew point and wet bulb temperature measurements.

Type K/J Thermometer Specifications

Details range and accuracy for Type K and Type J thermocouple measurements.

Instrument Description

Display and Control Buttons Overview

Describes the LCD display and the primary operational buttons for device control.

Ports, Sockets, and Slots

Details the probe input, thermometer socket, SD card slot, and RS232 output.

Physical Components and Accessories

Covers battery compartment, stand, probe parts, and other physical components.

Operating Instructions

Function Selection and Measurement Modes

How to select and switch between measurement modes like Humidity, Dew Point, and Thermometer.

Humidity and Temperature Measurement Procedure

Steps for performing humidity and temperature measurements using the device.

Dew Point and Wet Bulb Measurement

Instructions for measuring dew point and wet bulb temperatures.

Type K/J Thermometer Operation

Guide for using the instrument with Type K and Type J thermocouple probes.

Data Hold and Recording Functions

How to use the data hold feature and record maximum/minimum readings.

Datalogger Preparation and Operation

Steps for preparing the SD card and operating the auto and manual datalogger functions.

Time and Sampling Information Check

How to view the current time and sampling time settings on the device.

SD Card Data Management

SD Card Data Structure and Naming

Explanation of the folder structure and file naming conventions for logged data.

Data Transfer to Computer

Procedure for transferring data files from the SD card to a PC using Excel.

Advanced Settings Configuration

Clock and SD Card Decimal Character Settings

How to set the device's internal clock and configure the SD card decimal point format.

Power, Beeper, and Thermometer Type Settings

Configuration options for auto power-off, beeper sound, and thermometer probe type.

Temperature Units and Sampling Time Settings

Setting the desired temperature units (°C/°F) and data sampling intervals.

SD Memory Card Formatting

Instructions for formatting the SD card, which will erase all stored data.

PC Serial Interface

Data Stream Format and PC Connection

Details on the 16-digit data stream output and required connection for PC interfacing.

System Reset and Battery Maintenance

System Reset Procedure

Steps to perform a system reset using the dedicated reset button.

Battery Replacement Guide

Instructions for safely removing and replacing the device's batteries.