REEKON TOMAHAWK T1 User Manual

A
B
GROUP 1
E-PAPER DISPLAY
TOMAHAWK
QUICK START GUIDE
OLED - QUICK ACTIONS
The Quick Actions Menu on the T1 gives you access to helpful settings
that you can
enable / disable as needed.
SETUP
INSTALL INCLUDED BATTERY
STEP 1
PRESS CAPTURE BUTTON TO
SAVE MEASUREMENT
TO E-PAPER DISPLAY
STEP 3
CAPTURE:
Saves measurement to E-Paper Display and ROCK app
(if connected).
Select from a series of measuring functions.
1.
QUICK ACTIONS MENU:
2.
5.
3.
CURSOR UP/DOWN:
Moves cursor up and down on E-paper Display or in
Quick Actions Menu.
4.
CLEAR/DELETE:
Quick press will delete measurement on E-Paper Display
that is highlighted or provide options for mass deletion.
6.
UNITS/MAIN MENU:
Quick press will rotate between units.
(Press and Hold: Will enter Main Menu options).
LASER/POWER ON/OFF:
Quick press will toggle Laser on/off
(Press and Hold: Will turn device on/off).
DIAGRAM
AUTOLOCK
BLOQUEO DE CUCHILLA
VERROUILLAGE AUTOMATIQUE
CAPTURE
CAPTURA
CAPTURE
PANTALLA DE
PAPEL ELECTRÓNICO
E-PAPER DISPLAY
ÉCRAN E-PAPIER
UNIDADES/MENÚ
UNITÉS/MENU
MAGNETIC TIP
PUNTA MAGNÉTICA
CROCHET MAGNÉTIQUE
LASER/POWER ON/OFF
LÁSER/ENCENDIDO/APAGADO
LASER/MARCHE/ARRÊT
CLEAR/DELETE
BORRAR/ELIMINAR
EFFACER/SUPPRIMER
CURSOR UP/DOWN
CURSOR ARRIBA/ABAJO
CURSEUR HAUT/BAS
OLED DISPLAY
PANTALLA OLED
ÈCRAN OLED
UNITS/MAIN MENU
QUICK ACTIONS
FUNCIONES RÁPIDAS
FONCTIONS RAPIDES
SELECT UNIT OF
MEASUREMENT
STEP 2
AUTOLOCK
UNIT OF MEASUREMENT
NOTE: Appearances, features, and functionality may vary from the written instructions based on
updates made to device software. Please visit our website for latest information and additional details.
Dashing on the OLED display is a feature of the T1
Tomahawk to prevent showing an incorrect
measurement on the display. Seeing dashes is a
normal part of the T1 operation and part of the
robust error-checking redundancy features built
into the T1 encoding system.
Dashing may appear during initial startup, routine
use, or other conditions. To relocate the position on
the T1, slowly extend and retract the tape measure
blade. The T1 will quickly locate where it is and
display a measurement on the screen.
DASHING ON OLED
AUTOLOCK
ENGAGED
SLIDE DOWN SLIDE UP
AUTOLOCK
DISENGAGED
OLED DISPLAY
RECORDED
MEASUREMENT
MEASUREMENT
LABEL
MEASUREMENT
GROUP
BATTERY LEVEL
NOTE: Slowly extend
and/or retract the tape
measure blade to allow
the T1 to locate its
position.
BLUETOOTH
CONNECTION
- Toggles T1 between inside and outside
measurements.
- Switch between absolute and relative
measuring mode.
- Allows for quick incremental measurement.
- Flips screen for easy viewing when inverted.
- Removes all active measurement modes
selected.
TOGGLE
MB MF
TOGGLE
REL
GUIDE
LAYOUT
FLIP
SCREEN
CLEAR
ALL
- Exits to live view measurement mode.
EXIT
SHOw
CENTER
- Quickly locate center (or half) of a
measurement.
The user can enable / disable this feature by sliding the Autolock selection slider
upwards / downwards as shown.
By default the tape blade will not retract unless the Autolock button is depressed.

REEKON TOMAHAWK T1 Specifications

General

Connectivity	Bluetooth
Accuracy	±1.5mm
Display	LCD with backlight
App Compatibility	iOS and Android
Units of Measurement	m, ft, in, ft+in
Blade Material	Steel
Laser Type	Class II Laser

Summary

Setup Process

Install Battery

Instructions for installing the included battery into the T1 Tomahawk device.

Select Unit of Measurement

Guide on selecting the desired unit of measurement for the T1 Tomahawk.

Save Measurement

Procedure to save a measurement to the E-Paper Display using the capture button.

Key Device Features

Dashing on OLED Display

Explanation of the T1 Tomahawk's OLED display feature to prevent incorrect measurements.

Autolock Functionality

Details on the Autolock feature for tape blade retraction and its enable/disable setting.

Controls and Quick Actions Menu

Device Diagram and Controls

Identification of key buttons and their functions on the T1 Tomahawk device.

OLED Quick Actions

Overview of the T1's Quick Actions Menu for accessing helpful settings.

Quick Actions Navigation and Functions

Navigating Quick Actions

Steps to navigate and select desired quick actions from the OLED display menu.

Toggle Measure Front/Back

Switch between measuring from the front or back reference surface of the T1.

Toggle Relative Measurement

Switch between absolute and relative measurement modes on the T1.

Show Center Measurement

Function to display the center point of a given measurement on the T1.

Create Measurement Groups

Method for creating groups to organize saved measurements, importing as tags in the ROCK app.

Layout Guide Feature

Utilize the Layout Guide to see multiples of selected measurements on the E-Paper Display.

ROCK Jobsite App Integration

App Overview

Information on the ROCK Jobsite App for streamlined measurement organization and sharing via Bluetooth.

Maintenance and Safety

T1 Maintenance Components

List of adjustable, repairable, and replaceable components of the T1 Tomahawk.

Charging the T1 Battery

Instructions on how to charge the T1's rechargeable battery pack using a USB-C cable.

User Safety Warnings

Crucial safety warnings regarding device usage, tape conductivity, and environmental conditions.

FCC and ISED Canada Compliance

Statements regarding compliance with FCC and ISED Canada regulations for radio frequency emissions.

Technical Assistance

Information on where to find technical support, repair, and additional information via the website.