Why is the range of my Reely 1518204 Remote Control system very short?
If the range of your Reely Remote Control system is very short, check the batteries in both the transmitter and receiver. Also, inspect the receiver aerial for any damage. For testing purposes, try installing the receiver aerial in a different position on your model.
What to do if my Reely 1518204 Remote Control transmitter doesn’t respond?
If your Reely Remote Control transmitter isn't responding, start by checking the batteries. Ensure they are correctly inserted with the proper polarity. Inspect the battery contacts and verify the on/off switch is in the correct position.
What to do if Reely 1518204 Remote Control transmitter switches off on its own?
If your Reely Remote Control transmitter switches off by itself, check or replace the batteries. Also, inspect the contacts in the battery compartment.
What to do if the servos do not respond on my Reely 1518204?
If the servos on your Reely Remote Control are not responding, check the batteries in the receiver and test the switch cable. Test the BEC function of the controller and verify the polarity of the servo connector. Check the digital coding of the transmitter. Perform binding. For testing, change the receiver and bind again.
Why do the servos vibrate on my Reely 1518204 Remote Control?
If the servos vibrate on your Reely Remote Control, check the batteries in the remote control and the receiver. Inspect the connectors on the receiver. If the receiver has gotten wet, dry it with a hair dryer. Check the receiver aerial for damage. Reorient the receiver aerials in the model for test purposes.
Why does a servo hum or chirp on my Reely 1518204 Remote Control?
If a servo hums or chirps on your Reely Remote Control, check the batteries in the receiver. Make sure the linkage rods run smoothly. For testing, operate the servo without the servo arm.
General| Channels | 6 |
|---|---|
| Frequency | 2.4 GHz |
| Battery Type | AA |
| Battery Quantity | 4 |
| Type | Pistol grip |
To Next Page
