To Next PageTo Next Page
Need help?Do you have a question about the Reely REX-X PROMO II and is the answer not in the manual?
Alloy chassis for REX-X 1/8 model.
Alloy front shock tower for improved suspension mounting.
Left/right hub carriers for front axle assembly.
Upper suspension arm for the front of the model.
Front shock absorber assembly, 109mm, with dustproof features.
Rear shock absorber assembly, 126mm, with dustproof features.
Front shock spring, 1.6mm diameter, 58mm length.
White shock spring, 60mm length, 1.55mm wire diameter.
Steel main gear with 46 teeth for the drive train.
Mount for center differential, supplied as a 2-piece set.
Front/rear differential gear assembly unit.
Steel pinion gear with 43 teeth for the drive system.
Clutch shoe assembly including a spring.
Clutch housing with 12 teeth and ball bearing.
Metal servo saver set for steering linkage.
Chassis brace component for structural reinforcement.
Front arm stud with 30mm length for suspension.
Set of two upper rods, 5x25mm, for tensioning.
Specialized tools for clutch assembly and maintenance.
Ball end fitting for 7mm spherical joints.
Replacement air filter sponge element for 1/8 scale round filters.
Blue spacer for engine mounting adjustments.
Rear adapter for 3.5cc engines, connecting manifold.
Unpainted body shell for the REX-X Buggy model.
Decal sheet for REX-X with included paint mask.
Yellow wing part for 1/8 scale models.
Set of 4 blue wheel nuts for securing wheels.
Pre-glued black wheel for 1:8 scale models.
Black 3mm chassis made from 7075 material.
Blue anodized front shock tower, 5mm, 7075 material.
Blue aluminum rear hub for suspension assembly.
Carbon fiber front damper stay for REX-X, 4mm thick.
Blue 7075 aluminum front suspension plate.
50-tooth spur gear for 2-speed transmission.
45-tooth spur gear for 2-speed transmission.
Pinion gear with 14 teeth for 2-speed transmission.
Silicone shock oil with 400 cSt viscosity for shock absorbers.
Silicone oil for differentials with 10000 cSt viscosity.
Specialized tools for clutch assembly and maintenance.
Yellow racing disk marker, 150mm diameter.
Contact numbers for placing orders via phone and fax.
Contact details for ordering via email and online.
Alloy chassis for REX-X 1/8 model.
Alloy front shock tower for improved suspension mounting.
Left/right hub carriers for front axle assembly.
Upper suspension arm for the front of the model.
Front shock absorber assembly, 109mm, with dustproof features.
Rear shock absorber assembly, 126mm, with dustproof features.
Front shock spring, 1.6mm diameter, 58mm length.
White shock spring, 60mm length, 1.55mm wire diameter.
Steel main gear with 46 teeth for the drive train.
Mount for center differential, supplied as a 2-piece set.
Front/rear differential gear assembly unit.
Steel pinion gear with 43 teeth for the drive system.
Clutch shoe assembly including a spring.
Clutch housing with 12 teeth and ball bearing.
Metal servo saver set for steering linkage.
Chassis brace component for structural reinforcement.
Front arm stud with 30mm length for suspension.
Set of two upper rods, 5x25mm, for tensioning.
Specialized tools for clutch assembly and maintenance.
Ball end fitting for 7mm spherical joints.
Replacement air filter sponge element for 1/8 scale round filters.
Blue spacer for engine mounting adjustments.
Rear adapter for 3.5cc engines, connecting manifold.
Unpainted body shell for the REX-X Buggy model.
Decal sheet for REX-X with included paint mask.
Yellow wing part for 1/8 scale models.
Set of 4 blue wheel nuts for securing wheels.
Pre-glued black wheel for 1:8 scale models.
Black 3mm chassis made from 7075 material.
Blue anodized front shock tower, 5mm, 7075 material.
Blue aluminum rear hub for suspension assembly.
Carbon fiber front damper stay for REX-X, 4mm thick.
Blue 7075 aluminum front suspension plate.
50-tooth spur gear for 2-speed transmission.
45-tooth spur gear for 2-speed transmission.
Pinion gear with 14 teeth for 2-speed transmission.
Silicone shock oil with 400 cSt viscosity for shock absorbers.
Silicone oil for differentials with 10000 cSt viscosity.
Specialized tools for clutch assembly and maintenance.
Yellow racing disk marker, 150mm diameter.
Contact numbers for placing orders via phone and fax.
Contact details for ordering via email and online.
General| Weight | 10.5 kg |
|---|---|
| Foldable | Yes |
| Harness | 5-point harness |
| Storage Basket | Yes |
| Seat Recline | Multi-position recline |
