EasyManua.ls Logo

Reencle Prime - Waste Amount and Maintenance

Reencle Prime
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Reencle MANUAL 13
For large amount of food waste
When not using the machine for a long time (over 1month)
When the stu󽗿 in the Reencle becomes boggy
with too much water
Putting food waste in the Reencle Cleaning the mesh 󽘀lter
IV. Operational principles & How to Use
4. Instructions by the amount of waste
5. How to care Reencle
Put separately several times.
(Make sure you separate food waste from general waste
in case of making foods which can cause lots of amount
of food waste)
1. Decompose all the food waste in Reencle perfectly.
2. Unplug, scoop out all of the byproduct from the
Reencle, seal well and store the byproduct in a well-
ventilated place. (avoid the sunlight)
Before putting food waste in the Reencle, rinse it
with running water and pat it dry
Clean the mesh 󽘀lter frequently with using a brush. The
mesh 󽘀lter can be separated and be washed with water.
Press the dry button and do not put food waste for one
or two days.
(Put food waste again when it becomes a dry condition)
3. The byproduct can be reused depending on
how well they are kept.
When not using for a short period(1~2weeks) of time,
keep the power on. (automatic sleep mode after 24 hours)
Clean with a brush Rinse with water

Other manuals for Reencle Prime

Related product manuals