EasyManua.ls Logo

Reencle Prime - Maintenance and Component FAQs

Reencle Prime
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20 Reencle MANUAL
Q. What should I do when the microorganism is dry?
Q. How do I clean the Reencle?
Q. What are the black fragments in the microorganism?
A.
A.
A.
The inside of Reencle is consisted of heat insulating materials, keeping the condition ideal for
the microorganism to decompose foods when in operation. Therefore, if there is little to no
foods being input, the inside of Reencle may become dry. When dry, Reencle may cause
noises. In such cases, the inner walls of the Reencle may become soiled with particles, the 󽘀lter
contaminated, and powders may be released to the air.
When dry, input additional food waste or 500~900ml(16.9 oz~30.4oz) of water in order to
prevent
friction within the Reencle.
Do not clean/rinse Reencle with water. Mechanical breakdowns may occur from cleaning
Reencle with water, and expenses may occur. If the inner walls of the Reencle is soiled with
particles, wipe the walls with a wet wipe.
The black fragments are activated carbons. Do not remove them as they serve the
purpose of providing a steady supply of oxygen to the microorganisms during the initial
stages of cultivation, as well as deodorizing. Activated carbons help the baby microorganisms
adapt faster to the environment inside , but lack of activated carbons does not a󽗿ect the
decomposing capabilities.
VI. Frequently Asked Questions

Other manuals for Reencle Prime

Related product manuals