13
GUARANTEE
All new AU S-TWIN controls units are guaranteed by REER for a period of
12 (twelve) months under normal working conditions against defects due
to faulty materials and workmanship.
During the aforesaid period REER promises to repair or replace faulty
parts free of charge. This guarantee covers both material and labour.
REER reserves the right to decide whether to repair equipment or replace it
with equipment of the same type or having the same characteristics.
The validity of this guarantee is subject to the following conditions:
• The user must notify REER of the fault within twelve months
following the date of delivery of the product.
• The equipment and all parts thereof must be in the conditions in
which they were supplied by REER.
• The serial numbers must be clearly legible.
• The defect or malfunction must not arise directly from:
– Improper use;
– Non-observance of instructions for use;
– Negligence, inexperience, improper maintenance;
– Repairs, modifications adjustments carried out by personnel not
authorised by REER, tampering, etc.;
– Accidents or collisions (also during transportation or due to acts of
God);
– Other reasons for which REER cannot be held responsible.
Repairs will be carried out at REER’s laboratories, to which the material
must be consigned or delivered: transport costs and any damage or loss
of material during shipment will be charged to the user.
All replaced products and parts are property of REER.
REER does not recognise any other form of guarantee or rights other than
those expressly stated above; no requests for compensation for damages
incurred for costs, suspension of activities or any other events or
circumstances connected in any way with malfunctioning of the product or
any parts thereof will be taken into consideration.
In order to ensure the correct operation of the photoelectric barrier, careful and full compliance with all
the rules, instructions and warnings stated in this manual is essential.
REER s.p.a. declines all responsibility for events arising from non-compliance with all or part of the
aforesaid instructions.
Specifications subject to change without warning. • No part of this manual may be reproduced without the prior consent of REER.